• COMMUNITY-LIST
• ROUTER OSPF
• ROUTER RIP
• ROUTER ISIS
• ROUTER BGP
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
E-Series Original command.
Related
Commands
exit — returns to the lower command mode.
exec-timeout
Set a time interval that the system waits for input on a line before disconnecting the session.
Syntax exec-timeout minutes [seconds]
To return to default settings, use the no exec-timeout command.
Parameters minutes Enter the number of minutes of inactivity on the system
before disconnecting the current session. The range is from
0 to 35791. The default is 10 minutes for the console line
and 30 minutes for the VTY line.
seconds (OPTIONAL) Enter the number of seconds. The range is from
0 to 2147483. The default is 0 seconds.
Control and Monitoring 113