Dell 9.8(0.0) - page 1170

To return to the default, use the no advertise med voice-signaling

{vlan-id layer2_priority DSCP_value} | {priority-tagged number}

command.

Parameters vlan-id Enter the VLAN ID. The range is from 1 to 4094.

layer2_priority Enter the Layer 2 priority (C-Series and E-Series only). The

range is from 0 to 7.

DSCP_value Enter the DSCP value (C-Series and E-Series only). The range

is from 0 to 63.

priority-tagged

number

Enter the keywords priority-tagged then the Layer 2

priority. The range is from 0 to 7.

Defaults unconfigured.

Command

Modes

CONFIGURATION (conf-lldp)

Command

History This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the S-Series.

7.6.1.0 Introduced on the C-Series and E-Series.

Commands debug lldp interface — debugs LLDP.

show lldp neighbors — displays the LLDP neighbors.

1170 Link Layer Discovery Protocol (LLDP)