Dell 9.8(0.0) - page 1516

description
Enter a description of the RIP routing protocol.
S4820T
Syntax description {description}
To remove the description, use the no description {description}
command.
Parameters description Enter a description to identify the RIP protocol (80
characters maximum).
Defaults none
Command
Modes
ROUTER RIP
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 7.7.1.0 Introduced on the E-Series.
Related
Commands
router rip — enters ROUTER mode on the switch.
1516 Routing Information Protocol (RIP)