Command
Modes
ROUTER BGP
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
pre-7.7.1.0 Introduced.
Related
Commands router bgp — enters ROUTER mode on the switch.
deny bandwidth
Enables you to specify link band width extended-community attribute as the matching criteria to deny
incoming or outgoing traffic.
Syntax deny bandwidth
To disable this setting, enter the no deny bandwidth command.
Parameters bandwidth Enter the keyword bandwidth to specify extended-
community attribute as the matching criteria for denying
traffic. The range is from 0 to 102400.
Defaults N/A
Command
Modes
EXTENDED COMMUNITY LIST
Command
History Version Description
9.7(0.0) Introduced on the S-Series.
Related
Commands
permit bandwidth – specify link band width extended-community attribute as the
matching criteria to permitting incoming or outgoing traffic..
Border Gateway Protocol 443