Version Description
7.4.1.0 Introduced on the E-Series.
Example Dell#show ipv6 ospf 3 neighbor gi 1/2
Neighbor ID Pri State Dead Time Interface ID
Interface
63.114.8.36 1 FULL/DR 00:00:38 4 Te
1/2
Dell#
timers spf
Set the time interval between when the switch receives a topology change and starts a shortest path first
(SPF) calculation.
S4820T
Syntax timers spf delay holdtime
To return to the default, use the no timers spf command.
Parameters delay Enter a number as the delay. The range is from 0 to
4294967295. The default is 5 seconds.
holdtime Enter a number as the hold time. The range is from 0 to
4294967295. The default is 10 seconds.
Defaults • delay = 5 seconds
• holdtime = 10 seconds
Command
Modes
ROUTER OSPFv3 for OSPFv3
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S6000-ON, S6000, S4820T, S4810,
S5000.
Usage
Information
Setting the delay and holdtime parameters to a low number enables the switch to
an alternate path quickly but requires more CPU usage.
Example Dell#conf
Dell(conf)#ipv6 router ospf 1
Dell(conf-ipv6-router_ospf)#timer spf 2 5
1378 Open Shortest Path First (OSPFv2 and OSPFv3)