Dell 9.8(0.0) Virtual Routing and Forwarding (VRF)

Virtual Routing and Forwarding (VRF)

Virtual Routing and Forwarding (VRF) allows multiple instances of a routing table to co-exist on the same

router at the same time.

Creates a customer VRF.

Syntax ip vrf {vrf-name | management} [vrf_id]

To delete a customer VRF, use the no ip vrf {vrf-name | management}

[vrf_id] command.

Parameters vrf-name Enter the name of the VRF that you want to create.

management Use this keyword when you want to create the management

VRF.

vrf_id Enter the ID of the VRF that you want to create.

Defaults Available by default for management VRF. For creating other customer VRFs, the

feature vrf option in config mode must be enabled.

Command

Modes

CONFIG

Command

History This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000–ON and Z9500.

9.4(0.0) Introduced on the S4810 and S4820T.

Usage

Information Use this command to create or delete a customer VRF. You cannot use the

keyword default as a VRF name as it indicates a special VRF. Use the keyword

management to create a management VRF. You need not provide a VRF ID while

1872 Virtual Routing and Forwarding (VRF)