Version Description
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Usage
Information
This command enables a hardware watchdog mechanism that automatically
reboots an Dell Networking OS switch/ router with a single unresponsive unit. This
behavior is a last-resort mechanism intended to prevent a manual power cycle.
show hardware layer2
Display Layer 2 ACL or eg data for the selected stack member and stack member port-pipe.
Syntax show hardware layer2 {eg-acl | in-acl} stack-unit id port-set
0–0
Parameters eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to
select between ingress or egress ACL data.
stack-unit id Enter the keyword stack-unit to select a stack ID. The
range is from 0 to 11.
port-set 0–0 Enter the keywords port-set with a port-pipe number. .
The range is from 0 to 0.
Defaults none
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Usage
Information
The unit numbers given are internal port numbers.
620 Debugging and Diagnostics