hop-limit maximum 251
mtu 1350
other-config-flag on
reachable-time 540
retrans-timer 101
router-preference maximum medium
trusted-port
Dell(conf-ra_guard_policy_list)#
Related
Commands •ipv6 nd ra-guard enable — Allows you to configure the RA guard related
commands.
•ipv6 nd ra-guard policy — Defines the RA guard policy name and enter the RA
guard policy list configuration mode.
•device-role — Specifies the role of the device attached to the port.
•hop-limit — Enables the verification of the advertised hop count limit.
•mtu — Sets the maximum transmission unit (MTU) value.
•other-config-flag — Enables the verification of the advertised other
configuration parameter.
•reachable-time — Sets the advertised reachability time.
•retrans-timer — Sets the advertised retransmission time.
•router-preference maximum — Enables the verification of the advertised default
router preference (DRP) value.
•trusted-port — Applies the policy to trusted ports.
show ipv6 nd ra-guard policy
Display the configurations applied on all the RA guard policies or a specific RA guard policy.
Syntax show ipv6 nd ra-guard policy policy-name
Parameter policy policy-
name
Enter the keyword policy then the policy name. The policy
name allows a maximum of 140 characters.
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Neighbor Discovery Protocol (NDP) 1237