Parameters value Enter the advertised reachability time in milliseconds. The
range is from 0 to 3,600,000 milliseconds.
Defaults none
Command
Modes
POLICY LIST CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Related
Commands •ipv6 nd ra-guard enable — Allows you to configure the RA guard related
commands.
•ipv6 nd raguard policy policy-name — Defines the RA guard policy name and
enter the RA guard policy configuration mode.
retrans-time
Enable the verification of the configured retransmission timer value in the received RA packets.
Syntax retrans—timer value
To reset the advertised retransmission interval, use the no retrans-timervalue
command.
Parameters value Enter the advertised retransmission time interval in
milliseconds. The range is from 100 to 4,294,967,295
milliseconds.
Defaults none
Command
Modes
POLICY LIST CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
1234 Neighbor Discovery Protocol (NDP)