Dell 9.8(0.0) - page 972

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series ExaScale.

6.4.1.0 Introduced

Usage

Information

The following describes the show tcp statistics cp command shown in the

following example.

Field Description

Rcvd: Displays the number and types of TCP packets received by

the switch.

• Total = total packets received

• no port = number of packets received with no

designated port

0 checksum

error...

Displays the number of packets received with the following:

• checksum errors

• bad offset to data

• too short

329 packets... Displays the number of packets and bytes received in

sequence.

17 dup... Displays the number of duplicate packets and bytes

received.

0 partially... Displays the number of partially duplicated packets and

bytes received.

7 out-of-order... Displays the number of packets and bytes received out of

order.

0 packets with

data after window

Displays the number of packets and bytes received that

exceed the switch’s window size.

0 packets after

Displays the number of packet received after the TCP

connection was closed.

0 window probe

packets...

Displays the number of window probe and update packets

received.

41 dup ack... Displays the number of duplicate acknowledgement packets

and acknowledgement packets with data received.

10184 ack... Displays the number of acknowledgement packets and

bytes received.

972 IPv4 Routing