show spanning-tree pvst — displays the PVST+ configuration.
vlan hello-time
Set the time interval between generation of PVST+ 7 BPDUs.
S4820T
Syntax vlan vlan-range hello-time seconds
To return to the default value, use the no vlan hello-time command.
Parameters vlan vlan-range Enter the keyword vlan then the VLAN numbers. The range
is from 1 to 4094.
hello-time
seconds
Enter the keywords hello-time then the time interval, in
seconds, between transmission of BPDUs. The range is from
1 to 10 seconds. The default is 2 seconds.
Defaults 2 seconds
Command
Modes
CONFIGURATION (conf-pvst)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced.
Related
Commands vlan bridge-priority — sets the bridge-priority value.
1456 Per-VLAN Spanning Tree Plus (PVST+)