show config
View the current configuration for the mode. Only non-default values are displayed.
Syntax show config
Command
Modes
CONFIGURATION RSTP (conf-rstp)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Example Dell(conf-rstp)#show config
!
protocol spanning-tree rstp
no disable
bridge-priority 16384
show spanning-tree rstp
Display the RSTP configuration.
Syntax show spanning-tree rstp [brief] [guard]
Parameters brief (OPTIONAL) Enter the keyword brief to view a synopsis of
the RSTP configuration information.
guard (OPTIONAL) Enter the keyword guard to display the type of
guard enabled on an RSTP interface and the current port
state.
1566 Rapid Spanning Tree Protocol (RSTP)