To return to the default, use the no ip ospf network command.
Parameters broadcast Enter the keyword broadcast to designate the interface as
part of a broadcast network.
point-to-point Enter the keywords point-to-point to designate the
interface as part of a point-to-point network.
Defaults Broadcast.
Command
Modes
ROUTER OSPF
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
ip ospf priority
To determine the designated router for the OSPF network, set the priority of the interface.
S4820T
Syntax ip ospf priority number
To return to the default setting, use the no ip ospf priority command.
Parameters number Enter a number as the priority. The range is from 0 to 255.
The default is 1.
Defaults 1
1290 Open Shortest Path First (OSPFv2 and OSPFv3)