Dell 9.8(0.0) - page 1236

Parameters high Enter the keyword high to set the DRP value as high.
low Enter the keyword low to set the DRP value as low.
medium Enter the keyword medium to set the DRP value as medium.
Defaults none
Command
Modes
POLICY LIST CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Related
Commands •ipv6 nd ra-guard enable — Allow you to configure the RA guard related
commands.
•ipv6 nd raguard policy policy-name — Defines the router advertisement (RA)
guard policy name and enter the RA guard policy configuration mode.
show config
Display the RA guard policy mode configurations.
Syntax show config
Command
Modes
POLICY LIST CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Example Dell(conf)#ipv6 nd ra-guard policy test
Dell(conf-ra_guard_policy_list)#show config
!
ipv6 nd ra-guard policy test
device-role router
1236 Neighbor Discovery Protocol (NDP)