Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Example Dell#clear counters vrrp vrf jay
Clear "show vrrp" counters of all vrrp groups on all
interfaces in VRF jay [confirm] yes
debug vrrp
Allows you to enable debugging of VRRP.
Syntax debug vrrp interface [vrrp-id] {all | bfd | database |
interface | ipv6 | packets | state | timer}
To disable debugging, use the no debug vrrp interface [vrrp-id] {all |
bfd | database | interface | ipv6 | packets | state | timer}
command.
Parameters interface Enter the following keywords and slot/port or number
information
• For Port Channel interface types, enter the keywords
port-channel then the number. The range is from 1 to
128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN interface, enter the keyword vlan then the
VLAN ID. The VLAN ID range is from 1 to 4094.
vrrp-id (OPTIONAL) Enter a number from 1 to 255 as the VRRP
group ID.
all Enter the keyword all to enable debugging of all VRRP
groups.
bfd Enter the keyword bfd to enable debugging of VRRP BFD
interactions.
database Enter the keyword database to enable debugging of
configuration changes.
Virtual Router Redundancy Protocol (VRRP) 1889