show ip tcp initial-time
Displays the interval that you configured for the device to wait before the TCP connection is attempted to
be established.
Syntax show ip tcp initial-time
Command
Modes EXEC
EXEC Privilege
Command
History Version Description
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL
platforms.
ip unreachables
Enable the generation of internet control message protocol (ICMP) unreachable messages.
S4820T
Syntax ip unreachables
To disable the generation of ICMP messages, use the no ip unreachables
command.
Defaults Disabled.
Command
Modes
INTERFACE
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
IPv4 Routing 931