test
Ingress IPV6 Acl :
-
Vlan Members :
1-100
show cam-acl-vlan
Display the number of flow processor (FP) blocks that is allocated for the different VLAN services.
Syntax show cam-acl-vlan
Command
Modes
EXEC Privilege
Command
History Version 9.3.
(0.0)
Introduced on the S4810, S4820T, Z9000 and MXL
platforms.
Usage
Information
After CAM configuration for ACL VLAN groups is performed, you must reboot the
system to enable the settings to be stored in nonvolatile storage. During the
initialization of CAM, the chassis manager reads the NVRAM and allocates the
dynamic VCAP regions.
The following table describes the output fields of this show command:
Field Description
Chassis Vlan Cam ACL Details about the CAM blocks allocated
for ACLs for various VLAN operations at
a system-wide, global level.
Stack Unit <number> Details about the CAM blocks allocated
for ACLs for various VLAN operations
for a particular stack unit.
Current Settings(in block sizes) Information about the number of FP
blocks that are currently in use or
allocated.
VlanOpenFlow Number of FP blocks for VLAN open
flow operations.
VlanIscsi Number of FP blocks for VLAN internet
small computer system interface
(iSCSI) counters.
VlanHp Number of FP blocks for VLAN high
performance processes.
VlanFcoe Number of FP blocks for VLAN Fiber
Channel over Ethernet (FCoE)
operations.
376 Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)