ip host
Assign a name and an IP address to the host-to-IP address mapping table.
S4820T
Syntax ip host name ip-address
To remove an IP host, use the no ip host name [ip-address] command.
Parameters name Enter a text string to associate with one IP address.
ip address Enter an IP address, in dotted decimal format, to be mapped
to the name.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced for the E-Series.
IPv4 Routing 917