Dell 9.8(0.0) - page 89

uplink-
state-group
for the uplink state group
configuration
users for the current users configuration
vlt for the current VLT configuration
wred-profile for the current wred-profile
configuration
configured (OPTIONAL) Enter the keyword configuration to display
line card interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the
checksum for the running configuration and the start-up
configuration.
compressed (Optional) Enter the keyword compressed to display the
compressed group configuration. Displays the compressed
configuration by grouping all similar configurations. The
compression is done only for interface related
configurations.
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.2.(0.0) Added support for the tunnel and EIS interface types.
9.0.0.0 Added support for the VLT option.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added the hardware-monitor option.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Expanded to include the last configuration change, start-up
last updated (date and time), and who made the change.
6.5.4.0 Added the status option.
File Management 89