Dell 9.8(0.0) Common MAC Access List Commands

Common MAC Access List Commands

The following commands are available within both MAC ACL modes (Standard and Extended) and do not

have mode-specific options. These commands allow you to clear, display, and assign MAC ACL

configurations.

The platform supports both Ingress and Egress MAC ACLs.

The MAC ACL can be applied on Physical, Port-channel and VLAN interfaces. As per the specified rules in

the ACL, the traffic on the interface/ VLAN members or Port-channel members will be permitted or

denied.

Clear counters for all or a specific MAC ACL.

Syntax clear counters mac access-group [mac-list-name]

Parameters mac-list-name (OPTIONAL) Enter the name of a configured MAC access list.

Command

Modes

EXEC Privilege

Command

History This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.1.1.0 Introduced on the E-Series.

264 Access Control Lists (ACL)