mep cross-check
Enable cross-checking for a MEP.
Syntax mep cross-check mep-id
Parameters mep-id Enter the MEP ID. The range is from 1 to 8191.
Defaults none
Command
Modes
ECFM DOMAIN
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the S-Series.
mep cross-check enable
Enable cross-checking.
Syntax mep cross-check enable {port | vlan-id}
Parameters port Down service with no VLAN association.
vlan-id Enter the VLAN to apply the cross-check.
Defaults none
Command
Modes
ECFM DOMAIN
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
188 802.1ag