Command
Modes
POLICY LIST CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Related
Commands •ipv6 nd ra-guard enable — Allows you to configure the RA guard related
commands.
•ipv6 nd raguard policy policy-name — Defines the RA guard policy name and
enter the RA guard policy configuration mode.
mtu
Enable the verification of the configured maximum transmission unit (MTU) value in the received RA
packets.
Syntax mtu value
To reset the MTU value, use the no mtu value command.
Parameters value Enter the maximum transmission unit value in bytes. The
range is from 1,280 to 11,982 bytes.
Defaults 0
Command
Modes
POLICY LIST CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Related
Commands •ipv6 nd ra-guard enable — Allows you to configure the RA guard related
commands.
1232 Neighbor Discovery Protocol (NDP)