show ip igmp snooping mrouter
Display multicast router interfaces.
S4820T
Syntax show ip igmp snooping mrouter [vlan number]
Parameters vlan number Enter the keyword vlan then the vlan number. The range is
from 1 to 4094.
Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command.
Usage
Information
If the port channel is a VLT port channel, an asterisk (*) after the port channel
number (Po 100*) indicates the port channel is locally down and that a remote VLT
port is up.
Example Dell#show ip igmp snooping mrouter
Interface Router Ports
Vlan 2 Te 1/3, Po 1
Dell#
Related
Commands •ip igmp snooping mrouter — configures a static connection to the multicast
router.
Internet Group Management Protocol (IGMP) 787