dcb-policy dcb-buffer-threshold (Global Configuration)
Assign the DCB policy to the DCB buffer threshold profile on stack ports that applies globally throughout
the system. This utility is supported on the and S4820T platforms. This command is not supported on the
S6000 platform because it does not contain stack ports.
Syntax dcb-policy buffer-threshold stack-unit all stack-ports all
profile-name
Parameters dcb-buffer-
threshold
Configure the profile name for the DCB buffer threshold
profile-name Enter the name of the profile, which can be a string of up to
32 characters in length.
stack-unit all Enter the stack unit identification. Indicates the specific the
stack unit or units. Entering all shows the status for all stacks.
stack-port all Enter the port number of a port in a switch stack.
Default None
Command
Modes
CONFIGURATION mode
Command
History Version Description
9.3(0.0) Introduced on the S4810 and S4820T platforms.
Usage
Information
You can configure up to a maximum of four lossless (PFC) queues. By configuring
four lossless queues, you can configure four different priorities and assign a
particular priority to each application that your network is used to process. For
example, you can assign a higher priority for time-sensitive applications and a
lower priority for other services, such as file transfers. You can configure the
amount of buffer space to be allocated for each priority and the pause or resume
thresholds for the buffer. This method of configuration enables you to effectively
manage and administer the behavior of lossless queues.
Example Dell(conf)# dcb-policy buffer-threshold stack-unit all stack-
ports all test
show qos dcb-buffer-threshold
Displays the DCB buffer threshold assigned to a QoS policy. This command is supported on the platform.
Syntax show qos dcb buffer-threshold {name}
606 Data Center Bridging (DCB)