not-advertise (OPTIONAL) Enter the keywords not-advertise to set the
status to DoNotAdvertise (that is, the Type 3 summary-LSA is
suppressed and the component networks remain hidden
from other areas.)
Defaults Not configured.
Command
Modes
ROUTER OSPF
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Usage
Information
Only the routes within an area are summarized, and that summary is advertised to
other areas by the ABR. External routes are not summarized.
Related
Commands area stub — creates a stub area.
router ospf — enters ROUTER OSPF mode to configure an OSPF instance.
area stub
Configure a stub area, which is an area not connected to other areas.
S4820T
Syntax area area-id stub [no-summary]
To delete a stub area, use the no area area-id stub command.
Parameters area-id Specify the OSPF area in dotted decimal format (A.B.C.D.) or
enter a number from zero (0) to 65535.
Open Shortest Path First (OSPFv2 and OSPFv3) 1263