ipv6 ipv6-
address
Enter the keyword ipv6 then the IPv6 address that is leased
to the client.
interface type Enter the keyword interface then the type of interface to
which the host is connected:
• For an 10/100 Ethernet interface, enter the keyword
fastethernet.
• For a Gigabit Ethernet interface, enter the keyword
gigabitethernet.
• For a Ten-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
interface
number
Enter the number of the interface.
lease value Enter the keyword lease then the amount of time the IPv6
address are leased. The range is from 1 to 4294967295.
Defaults none
Command
Modes • EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z-Series.
ip dhcp snooping database
Delay writing the binding table for a specified time.
S4820T
Syntax ip dhcp snooping database write-delay minutes
Parameters minutes The range is from 5 to 21600.
Defaults none
Command
Modes
CONFIGURATION
666 Dynamic Host Configuration Protocol (DHCP)