Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2.(0.0) Introduced on the Z9000, S4810, and S4820T.
application (for HTTP and ICMP)Configure the management egress interface selection for HTTP and ICMP.
NOTE: Only the options that have been newly introduced are described here. For a complete
description on all of the keywords and variables that are available with this command, refer the
respective Command Reference Guide of the applicable platform of the Release 9.2(0.0)
documentation set.
S4820T
Syntax application {all | application-type}
To remove a management application configuration, use the no application
{all | application-type} command.
Parameters application-
type
Enter any of the following keywords:
• For HTTP, enter the keyword http.
• For ICMP, enter the keyword icmp.
all Configure all applications.
Defaults None.
Command
Modes
EIS Mode (conf-mgmt-eis)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.3.(0.0) Added support for the HTTP and ICMP traffic on the Z9000,
S4810, and S4820T.
856 Interfaces