Version Description
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information To redistribute the default route (x:x:x:x::x), use the default-information
originate command.
Related
Commands default-information originate – configures default external route into OSPFv3.
router-id
Designate a fixed router ID.
S4820T
Syntax router-id ip-address
To return to the previous router ID, use the no router-id ip-address
command.
Parameters ip-address Enter the router ID in the dotted decimal format.
Defaults The router ID is selected automatically from the set of IPv4 addresses configured
on a router.
Command
Modes ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.1.(0.0) Introduced support for OSPFv3 on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information You can configure an arbitrary value in the IP address for each router. However,
each router ID must be unique.
1368 Open Shortest Path First (OSPFv2 and OSPFv3)