ip msdp cache-rejected-sa
Enable an MSDP cache for the rejected source-active entries.
S4820T
Syntax ip msdp cache-rejected-sa {number}
To clear the MSDP rejected source-active entries, use the no ip msdp cache-
rejected-sa {number} command then the ip msdp cache-rejected-sa
{number} command.
Parameters number Enter the number of rejected SA entries to cache. The range
is from 0 to 32766.
Defaults none
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.4.1.0 Introduced
Related
Commands
show ip msdp sa-cache rejected-sa — displays the rejected SAs in the SA cache.
Multicast Source Discovery Protocol (MSDP) 1179