Dell 9.8(0.0) - page 1560

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Example Dell#debug spanning-tree rstp bpdu tengigabitethernet 2/1 ?
in Receive (in)
out Transmit (out)
description
Enter a description of the rapid spanning tree.
Syntax description {description}
To remove the description, use the no description {description}
command.
Parameters description Enter a description to identify the rapid spanning tree (80
characters maximum).
Defaults none
Command
Modes
SPANNING TREE (The prompt is “config-rstp”.)
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
1560 Rapid Spanning Tree Protocol (RSTP)