Dell 9.8(0.0) - page 675

• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
Defaults none
Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Added the discard-counters, interface keywords, and
the interface variable.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series and S-Series.
Example The following example displays the interfaces configured with IP Source Guard:
Dell> show ip dhcp snooping source-address-validation
ip sav access-list on TenGigabitEthernet 1/1
Total cam count 3
permit host 0.0.0.0 count (0 packets)
permit host 10.1.1.252 count (0 packets)
permit host 10.1.1.253 count (0 packets)
ipmac-vlan sav access-list on TenGigabitEthernet 1/2
Total cam count 4
permit host 0.0.0.0 host 00:00:00:00:00:00 count (0 packets)
permit vlan 10 host 10.1.1.1 host 00:00:00:aa:00:01 count (0
packets)
permit vlan 10 host 10.1.1.2 host 00:00:00:aa:00:02 count (0
packets)
permit vlan 20 host 10.2.2.1 host 00:00:00:aa:00:03 count (0
packets)
permit vlan 20 host 10.2.2.2 host 00:00:00:aa:00:04 count (0
packets)
The following example displays the port channel interfaces configured with IP
Source Guard:
Dell> show ip dhcp snooping source-address-validation
interface portchannel 10
Dynamic Host Configuration Protocol (DHCP) 675