Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information All routers apply the bgp default local-preference command setting within
the AS. To set the local preference for a specific route, use the set local-
preference command in ROUTE-MAP mode.
Related
Commands
set local-preference — assigns a local preference value for a specific route.
bgp dmzlink-bw
Enables BGP Link Bandwidth.
S4820T
Syntax bgp dmzlink-bw
To disable BGP Link Bandwidth, enter the no bgp dmzlink-bw command.
Parameters dmzlink-bw Enter the keyword dmzlink-bw to enable BGP Link
Bandwidth in BGP multipath.
Defaults N/A
Command
Modes
ROUTER BGP
Command
History Version Description
9.7(0.0) Introduced on the S-Series.
418 Border Gateway Protocol