protocol-tunnel destination-mac
Overwrite the BPDU destination MAC address with a specific value.
Syntax protocol-tunnel destination-mac xstp address
Parameters stp Change the default destination MAC address used for L2PT
to another value.
Defaults The default destination MAC is 01:01:e8:00:00:00.
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series, and S-Series.
7.4.1.0 Introduced
Usage
Information
When you enable VLAN-Stacking, no protocol packets are tunneled.
Related
Command
show protocol-tunnel — displays tunneling information for all VLANs.
protocol-tunnel enable
Enable protocol tunneling globally on the system.
Syntax protocol-tunnel enable
To disable protocol tunneling, use the no protocol-tunnel enable command.
Defaults Disabled.
1676 Service Provider Bridging