dns-server
Assign a DNS server to clients based on address pool.
S4820T
Syntax dns-server address [address2...address8]
Parameters address Enter a list of DNS servers that may service clients on the
subnet. You may list up to eight servers, in order of
preference.
Defaults none
Command
Modes
DHCP <POOL>
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
domain-name
Assign a domain to clients based on the address pool.
S4820T
Syntax domain-name name
Parameters name Give a name to the group of addresses in a pool.
Defaults none
Command
Modes
DHCP <POOL>
Dynamic Host Configuration Protocol (DHCP) 649