resequence access-list
Re-assign sequence numbers to entries of an existing access-list.
Syntax resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-
to-Increment}
Parameters ipv4 | ipv6 |
mac
Enter the keyword ipv4or mac to identify the access list type
to resequence.
access-list-
name
Enter the name of a configured IP access list.
StartingSeqNu
m
Enter the starting sequence number to resequence. The
range is from 0 to 4294967290.
Step-to-
Increment
Enter the step to increment the sequence number. The
range is from 1 to 4294967290.
Defaults none
Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale (IPv6).
8.1.1.0 Introduced on the E-Series ExaScale (IPv4).
7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Access Control Lists (ACL) 235