Dell 9.8(0.0) RADIUS Commands

RADIUS Commands

The following RADIUS commands are supported by Dell Networking OS.

Configure the RADIUS server group that is used for Authentication, Authorization and Accounting.

Syntax aaa radius group group-name

To remove the RADIUS group configuration, use the no aaa radius group

group-name command.

Parameters group-name Enter the name of the RADIUS server group.

Defaults none

Command

Modes

CONFIGURATION

Command

History This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000–ON.

9.4.(0.0) Introduced on the S-Series and Z-Series.

Usage

Information You can use this command to configure the group of Radius servers used for

Authentication, Authorization, and Accounting purposes.

If the RADIUS group is not configured for Authentication, Authorization, and

Accounting, then globally configured Radius servers are used for the purposes.

When the RADIUS group is removed, the AAA configuration is also removed.

Example

View RADIUS transactions to assist with troubleshooting.

Syntax debug radius

To disable debugging of RADIUS, use the no debug radius command.

Security 1605