logging history sizeSpecify the number of messages stored in the Dell Networking logging history table.
Syntax logging history size size
To return to the default values, use the no logging history size command.
Parameters size Indicate a value as the number of messages to be stored.
The range is from 0 to 500. The default is 1 message.
Defaults 1 message
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
When the number of messages reach the limit you set with the logging history
size command, older messages are deleted as newer ones are added to the table.
Related
Commands show logging — displays information logged to the history buffer.
logging monitorSpecify which messages are logged to Telnet applications.
Syntax logging monitor [level]
To disable logging to terminal connections, use the no logging monitor
command.
1730 Simple Network Management Protocol (SNMP) and Syslog