Related
Commands ip dhcp snooping vlan — enables DHCP Snooping on one or more VLANs.
ip dhcp snooping binding
Create a static entry in the DHCP binding table.
Syntax [no] ip dhcp snooping binding mac address vlan-id vlan-id ip
ip-address interface type slot/port lease number
Parameters mac address Enter the keyword mac then the MAC address of the host to
which the server is leasing the IP address.
vlan-id vlan-id Enter the keywords vlan-id then the VLAN to which the
host belongs. The range is from 2 to 4094.
ip ip-address Enter the keyword ip then the IP address that the server is
leasing.
interface type Enter the keyword interface then the type of interface to
which the host is connected.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease then the amount of time the IP
address is leased. The range is from 1 to 4294967295.
Defaults none
Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Security 1663