Freescale Semiconductor, Inc...

Freescale Semiconductor, Inc.

10.3.2 MC68340V (3.3 V)

The MC68340V can operate with a 3.3-V power supply for significant power savings. The formula for power dissipation is

Pd ≈ V2 ⋅ f + dc

Table 10-2 shows typical electrical characteristics for both the MC68340 and MC68340V.

Table 10-2. Typical Electrical Characteristics

Parameter

MC68340 (5.0 V)

MC68340V (3.3 V)

Clock Frequency

0–16.78 MHz

0–8.39 MHz

 

0–25 MHz

0–16.78 MHz

Typical Current (16 MHz)

95 mA

TBD

Typical Current (8 MHz)

55 mA

30 mA

Standby Current

60 ∝A

25 ∝A

Running at 3.3 V saves 66% of the power consumption.

The 3.3 V operation provides the following user advantages:

Advantage

Benefit

Lower Supply Voltage

Fewer Batteries

Fewer Batteries

Less Weight

 

Smaller Size

Lower Current Drain

Extended Battery Life

Less Heat Generated

No Fan

 

No Fan Noise

Less EMF Radiation

Easier FCC Certification

 

Less Crosstalk

 

Closer PCB Traces

High Functional Integration

All-In-One 3.3 V Part:

 

Processor

 

Peripherals

 

Glue Logic

These advantages result in a much more portable system.

MOTOROLAMC68340 USER’S MANUAL10-13

For More Information On This Product,

Go to: www.freescale.com

Page 399 Page 401
Page 400
Image 400
Motorola manual Freescale Semiconductor, Inc 10.3.2 MC68340V 3.3, Typical Electrical Characteristics, Parameter
Page 399 Page 401

MC68340 specifications

The Motorola MC68340 is a highly integrated microprocessor that was introduced in the early 1990s. It belongs to the 68000 family of microprocessors and is designed to cater to the demands of embedded systems, particularly in telecommunications and networking applications. This chip represents a significant evolution in microprocessor technology by combining a microprocessor core with additional peripherals on a single chip, making it an attractive solution for engineers looking to design compact and efficient systems.

One of the key features of the MC68340 is its 32-bit architecture, which allows for significant processing power and data handling capabilities. This architecture enables the processor to handle larger data sizes and perform more complex calculations compared to its 16-bit predecessors. The MC68340 operates at clock speeds typically ranging from 16 MHz to 25 MHz. Its dual instruction pipeline enhances throughput, allowing for simultaneous instruction fetches and executions, which significantly boosts performance.

A notable characteristic of the MC68340 is the inclusion of integrated peripherals, which help reduce the overall component count in a system. Key integrated components include a memory management unit (MMU), a direct memory access (DMA) controller, and various communication interfaces such as serial ports. The memory management capabilities enhance the processor's ability to manage memory resources efficiently, enabling it to support multitasking environments commonly found in modern computing.

In terms of connectivity, the MC68340 features connections for both synchronous and asynchronous serial communication, making it well-suited for networking tasks. The processor supports a range of bus standards, including address and data buses, which facilitate seamless interaction with peripheral devices.

Another important aspect of the MC68340 is its flexibility. The processor supports multiple operating modes, including multiple CPU configurations and compatibility with the Motorola 68000 family, allowing for easier integration into existing systems.

Moreover, the MC68340 boasts low power consumption compared to many of its contemporaries, making it an excellent choice for battery-operated applications, enhancing its appeal in sectors like telecommunications, industrial control, and automotive systems. Its combination of performance, integration, versatility, and efficiency has secured the MC68340 a reputable position in the annals of embedded systems technology, proving to be a valuable asset for developers and engineers alike.
Top Page Image Contents