CUSTOMIZING ELITEVIEW
Parameter Definitions for the [startup] Section
| Table |
|
|
Parameter | Given Information |
|
|
Seq= | The sequence number from 1 to n, where n is a positive number equal to the total number of |
| startup processes you wish to invoke before running the EliteView platform program. |
|
|
EV_Flag | Distinguishes between EliteView and |
| 0 Designates the entry as a |
| closely with EliteView, but may be initiated within some EliteView commands as an |
| independent process. |
| 1 Designates an “EliteView Application;” i.e., it follows the set of rules specified by SMC to allow |
| interaction with other EliteView modules. |
|
|
Menu_Item | This is the text that appears in the menu. An ampersand “&” before one of the letters in the text |
| designates an |
| corresponding command. This is normally shown on screen with an underline. |
|
|
Executable | The name of the Windows application to be invoked when the corresponding item is selected. |
| This application program is set as the default application, which means that it is invoked only if |
| no other definition for an individual device exists. |
|
|
Optional Parameters | Command line parameters of the program. Optional entry. |
|
|
Example: Sample entry for [startup] section
[startup]
total=2
1=1,EVENT.EXE
2=1,TRAPMAN.EXE
From the [startup] section, you can view the following data:
•There are two applications that will be loaded with the main EliteView program.
•These are the Event Manager and the Trap Manager.
The [discover] Section
This section determines the settings for protocol selection and polling parameters under the Discovery module. These settings are determined by the choices you make during Configuration and within the Discovery Setup menu (see “Using Discovery” on page
