USING RMON
| Table |
|
|
Field | Description |
|
|
Event Status | Controls the flow of events. |
| Ready – A single event will be generated, after which the status will be set by the RMON probe to |
| “Fired.” While in the Fired state, no events will be generated until the status is reset to Ready or |
| Always Ready. |
| Always Ready – Disables flow control and allows events to generated at will. Using this setting runs the |
| risk of generating a high volume of traffic and affecting network performance. |
|
|
Matches | The number of times this channel has accepted a packet. |
|
|
Description | A comment provided by the user describing this channel. |
|
|
Status | The current status of the index entry in the Control Table: Valid, Under Creation or Invalid. |
|
|
| Table |
|
|
Field | Description |
|
|
Filters | Specifies the filter expressions used to capture data from the interface. |
|
|
Index | An index that uniquely identifies an entry in the filter table. |
|
|
Owner | The person who created this filter entry. |
|
|
Channel Index | The index used to identify the channel entry associated with this filter. |
|
|
Packet Data Offset | The offset from the beginning of each packet where a match of packet data will be attempted. |
|
|
Packet Data | The data that are to be matched with the input packet. |
|
|
Packet Data Mask | The mask that is applied to the match process. |
|
|
