DISCOVERY
Dump all UDP objects to namebase failed.
Cause: Write to hard drive fail.
Action: The hard drive space may not be enough.
Dump function cannot work when searching for objects.
Cause: Dump function can only work when Discover is busy.
Action: Wait until the search job is complete.
Initial namebase failure.
Cause: Name database files have a problem.
Action: Use name database manager to verify.
Invoke alive test program failed with error reason code = %d.
Cause: The error code comes from the return code of SDK’s function WinExec.
Action: Refer to the Microsoft SDK function reference.
Invoke MESSAGE.DLL failed!
Cause: This program may not have quit successfully last time.
Action: Quit Windows and test again.
Invoke toolbar not successful.
Cause: Create toolbar window failure.
Action: Close other applications and try again.
IPX Diagnostic Service Socket open failure.
Cause: The network sublayer has a problem.
Action: Use the alive test program to verify.
No bitmap file information in [bitmaps] of NETMGR.INI.
Cause: Cannot find any bitmap file information in NETMGR.INI.
Action: Use a text editor to edit NETMGR.INI.
No device information in [device] of NETMGR.INI.
Cause: Cannot find any device information in NETMGR.INI.
Action: Use a text editor to edit NETMGR.INI.
None of the protocols are enabled, please use network setup to configure again.
Cause: The record in NETMGR.INI is not correct.
Action: You should enable at least one protocol; use the network setup program to configure again.
