DISCOVERY
When looking for devices using Broadcast, you may need to press the Broadcast button several times to ensure that all attached devices have responded. For nodes that do not respond to broadcast queries, use the Search function. In general, it may be necessary to search for devices not located in the same network with the EliteView management station.
Menu Description
The menus provided for Discovery are briefly introduced below. Toolbar buttons are also described in this section.
Menu Definitions
Table 4-2 Discovery Menu Definitions
Menu | Label | Description |
|
|
|
| File | Exit current module – Closes the Discovery window and exits to the |
|
| calling program (i.e., EliteView platform or Windows Program Manager) |
|
|
|
| Protocol | Protocol selection and advanced settings |
|
| Select the devices to display based on network protocol: |
|
| UDP/IP – IP & ICMP, SNMP over UDP/IP agent |
|
| IPX – IPX, SNMP over IPX agent |
|
| Setup menu – Toggles display of devices without an SNMP agent; also sets |
|
| the scan rate and retry count. |
|
|
|
| Name | Name database management – Provides editing functions for the name |
|
| database, including adding or modifying object data. You can also dump all |
|
| the information gathered by Discovery into the Name database. |
|
|
|
| Tools | Alive Test – The Alive Test is used to directly test device response. |
|
|
|
| Help | Help and Version information – Provides detailed |
|
| displays the version number for this software module. |
|
|
|