Getting started

Planning the FortiGate configuration

 

 

NAT/Route mode with multiple external network connections

In NAT/Route mode, you can configure the FortiGate unit with multiple redundant connections to the external network (usually the Internet). For example, you could create the following configuration:

External is the default interface to the external network (usually the Internet).

Interface 1 is the redundant interface to the external network.

Internal is the interface to the internal network.

DMZ is the interface to the DMZ network.

You must configure routing to support redundant Internet connections. Routing can be used to automatically redirect connections from an interface if its connection to the external network fails.

Otherwise, security policy configuration is similar to a NAT/Route mode configuration with a single Internet connection. You would create NAT mode policies to control traffic flowing between the internal, private network and the external, public network (usually the Internet).

If you have multiple internal networks, such as a DMZ network in addition to the internal, private network, you could create route mode policies for traffic flowing between them.

Figure 5: Example NAT/Route multiple internet connection configuration

FortiGate-800 Unit

Externalin NAT/Route mode 204.23.1.5

Internet

EscEnter

8

Port 1 64.83.32.45

NAT mode policies controlling traffic between internal and external networks.

Internal network

 

192.168.1.3

Internal

 

192.168.1.1

 

 

Route mode policies

 

controlling traffic between

 

internal networks.

DMZ

DMZ network

10.10.10.2

 

 

10.10.10.23

Transparent mode

In Transparent mode, the FortiGate unit is invisible to the network. Similar to a network bridge, all FortiGate interfaces must be on the same subnet. You only have to configure a management IP address so that you can make configuration changes. The management IP address is also used for antivirus and attack definition updates.

You typically use the FortiGate unit in Transparent mode on a private network behind an existing firewall or behind a router. The FortiGate unit performs firewall functions as well as antivirus and content scanning but not VPN.

FortiGate-800 Installation and Configuration Guide

37

Page 37
Image 37
Fortinet FortiGate-800 manual NAT/Route mode with multiple external network connections