Language Reference
ACTPARM
| ACTPARM | Turn the active parameter area on or o. |
Item | Description |
Preset | State | OFF |
|
Number | Range | 0, 1, | 2, 3, 4 (If the \number" is omitted, the command default is 0, the |
|
| rst | line.) |
Example | 10 | OUTPUT | 723;"ACTPARM | 1;" | Turn on the active parameters . |
| 20 | OUTPUT | 723;"ACTPARM?;" | Query the top line value . | |
| 30 | OUTPUT | 723;"ACTPARM | 0?;" | Query the top line value . |
Description The ACTPARM command turns the display of the active parameter area on or o. The active parameter area has the capability of containing four lines of
data. Therefore, when querying the active parameter area, the following data lines are placed on the bus for the computer:
0 queries the rst line.
1 queries the second line.
2 queries the third line.
3 queries the fourth line.
4 queries all four lines.
Query Response