Language Reference

TRPST

Preset active trace conditions.

Example

110 OUTPUT 723;"TRPST;"

Reset the traces to a de￿ned state .

Description Use the TRPST command to reset the traces to a de￿ned state without a￿ecting the measurement parameters. The TRPST command executes the

following commands to preset trace functions:

￿Clear-write trace A. (CLRW TRA)

￿Blank trace B. (BLANK TRB)

￿Blank trace C. (BLANK TRC)

￿Turn o￿ trace-A-minus-trace-B. (AMB OFF)

￿Turn o￿ trace-A-minus-trace-B-plus-display-line. (AMBPL OFF)

￿Turn o￿ video averaging. (VAVG OFF)

￿Set trace A length to 800 elements. (TRDEF TRA,800 )

￿Set trace B length to 800 elements. (TRDEF TRB,800 )

￿Set trace C length to 800 elements. (TRDEF TRC, 800)

￿Display trace A. (TRDSP TRA,ON;TRDSP TRB,OFF;TRDSP TRC,OFF )

See Also CLRW, BLANK, AMB, VIEW, AMBPL, VAVG, TRDEF, TRDSP, TRSTAT

7-510