HP 1B, 2B, 71450B manual 64

Using Variables and Traces

Using Math and Move Commands

The following table lists math and move commands that may require the use of the MEASU command.

Math and Move Commands Requiring Conversion with MEASU

Command						De￿nition
ABS	Compute absolute				value .
ADD	Add sources, point b y point.
AVG	Average		source	with destination,				point	b	y	point.
BIT	Store or return value of bit.
CONCAT	Concatenate traces.
DIV	Divide	sources,		point b y		point,		then	discard		remainder .
EXP	Divide	source		by	scaling	factor		and	raise	to power of 10.
INT	Compute		integer		value.
LOG	Compute		logarithm.
MEAN	Compute mean value of points.
MIN	Retain	minimum			value.
MOD	Divide	sources,		point by		point,		then	retain		remainder .
MOV	Duplicate		value(s)		contained		in	source and place in destination.
MPY	Multiply		sources,		point by		point.
MXM	Retain	maximum			value.
RMS	Compute root mean square of source, point by point.
SQR	Compute square root of source, point by point.
STDEV	Compute		standard deviation.
SUB	Subtract		sources,		point	by	point.
SUM	Add sources, point by point.
SUMSQR	Add square of sources, point b							y point.
VARIANCE	Compute variance .
XCH	Exchange sources.

2-18