Language Reference

LIMIFAIL

LIMIFAIL

Example

Description

Query limit-line test results.

10 OUTPUT 723;"LIMIFAIL?;"

Execute LIMITEST ON before executing LIMIFAIL. The LIMIFAIL command returns a number based on the condition of the sweep at the moment your query is sent. You may send the query at anytime during the sweep, there is no need to wait for the trace to complete. The following numbers indicate the condition for the returned value:

￿\0" indicates data has been compared to limits and does not exceed the limit-line parameters.

￿\1" indicates that the data fell below the lower limit line, prior to your execution of the query.

￿\2" indicates that the data exceeded the upper limit line, prior to your execution of the query.

￿\3" indicates that the data exceeded both the upper and lower limit lines, prior to your execution of the query.

7-203