Language Reference
IGENLIMIT
IGENLIMIT Set safety limit on current source's output.
N O T E
This command is valid only if Option 001, current source, is installed.
|
|
| Item |
| Description |
|
|
|
|
|
|
| Range |
|
| 6200 mA |
|
| Preset | State |
| 650 mA |
|
Example | 10 | OUTPUT 723;"IGENLIMIT 0.10;" | Set the limit to 6100 mA. | ||
Description The IGENLIMIT command sets an absolute limit for the current source. This limit protects a test device from damage if the current setting is too high. If
the current setting for the IGEN command is too high, the IGENLIMIT current value is used. When using IGENLIMIT, enter current limit value in amperes (0 to 0.20).