Language Reference
MKRL
| MKRL | Move the active marker to the reference level. |
Example | 50 | OUTPUT | 723;"SNGLS;TS;" | Sweep trace A. |
|
| 60 | OUTPUT 723;"MKPK HI;" | Place marker at highest | signal. | |
| 70 | OUTPUT | 723;"MKRL;" | Set reference level equal to marker amplitude . | |
| 80 | OUTPUT | 723;"TS;" | Sweep new measurement | range . |
Description The MKRL command sets the reference level equal to the amplitude of the displayed active marker. Update trace data after executing MKRL. An error
condition occurs if the active marker is a relative type that has been activated by the MKD, MKAL, or MKAR commands.